RUS | UKR | DSTU> Master's portal

about my group(in russia) page of my chair page of my faculty Master of DSTU Lozitski Yuri Vladimirovich

Lozitsky Yury Vladimirovich

Faculty: Electrotechnical

Speciality: Electric systems and networks

Theme of master's work:

Development of the diagnostic criteria of rotor air-gap non-uniformity in low-voltage asynchronous machines

Head of work: professor Rogozin George Grigorievich e-mail: rgg@elf.dgtu.donelsk.ua


Materials on a theme of master's work: Abstract | Links | Report about the search

e-mail: www. yurilozitski@yandex.ru

Resume:

Mean score during studing in university 4.82.
Freely I know Russian, and Ukranian.
In volume, sufficient for reading and correspondence, I know English.
I have an operational experience of the turner of 3-rd category. This qualification I has received at school.
I take a great interest in computers, programming, high technologies and all connected with this things. I have an average level of programming on C ++.
I have good skills of work in MathCad, Matlab.
I can work with following types of graphic editors – ACDSee, Adobe Photoshop.
I have some operational experience with packages AutoCad, LabView, MS Office, and also Macromedia DreamWeaver with which help this site is created.

Biography:

I was born 28 july 1984 in small town Chasov - Yar in Donetsk region. I'm one child in family.
Father – Lozitsky Vladimir Evgenevich 1960 y.b., works as the press operator at Chassov-Yar fire-resistant combine.
Mum – Lozitskaya Larissa Ivanovna 1957 y.b., works as the engineer II-nd category of group phisics - mechanical researches of central laboratory at Chassov-Yar fire-resistant combine.

Childhood

In preschool years I was brought up in ñindergarden «Woody tale». I liked this place very much and remind this time with gladness and pleasure. The brightest impression about that time - my first trip on the sea.

School

On September, 2-nd, 1991 I entered to the first class of Chasov - Yar primary school ¹ 15 where has received an elementary education. From the beginning of study I liked exact sciences very much. At lessons of mathematics, then algebra and geometry, physics and chemistry I was as at home. I took part in set of Olympiads on these subjects and was winner of few regional stages.
Wide enough knowledges in physics were useful for me to entering in DSTU. At entrance rating examinations in April, 2002 I have recived 54 from 60 possible points and on a speciality «Electric systems and networks», took the 1 place from 200 abiturients on given speciality.
Thus even before finishing school I could consider myself as the student. But this event didn't cool my thirst to knowledge and I ended schoowith a silver medal.
During study at school I also have received a speciality of the turner of III-th category for which reception my contempoparies spent additional 4 years of studing in professional schools.

University

In the Autumn of 2002 I went to university auditories for the first time. From first days of study I have understood, that studing will demand from me much more efforts than school. For me I-th semester of study was very difficult(I think it was hard for everyone who once was or is the student now) .
In the summer 2002 I have settled in a hostel ¹ 7 DSTU. Firstly it was very difficult to wean from home, but I do not regret about the settlement. The life in a hostel had some positive and negative sides, however positive sides were on much more.
So the student's life was adjusted in whole, but future prepared for me one of the heaviest tests in a life of each student – the first session!!!
Even now I remember a heap of the books read through by me and mountain of abstracts, which I had to conscientiously learned. In general first session I set well.
In further study I set all almost all sessions with excellent marks but put to it not few efforts!
Excellent knowelleges were useful to me. In the winter of 2006 I entered to the program on preparation of students for concern " Donetsksteel " - MP " (more info...) . Due to this program I had an opportunity to get additional economic education, and also to combine work on a speciality with study in university even before finishing DSTU.
Process of acquaintance with the enterprises of concern was very interesting. Every week for students selected for the program excursions to concern branches were spent. I first hand observed process of melt of steel on one of the largest metallurgical enterprise of Ukraine - Donetsk metalurgical factory (DMZ). Also I has visited chemical factory and even taste ice-cream from conveyor' belt on "Winter" ("Winter"s ice-cream is one of the best – so in 2005 the factory took 1st places at many competitions in the CIS countries). So excursions were best!
In the Summer of 2006 with perfect mark I have passed the state examination on a speciality « Electric systems and networks ». 25.07.06 I have received the bachelor's degree with distinction. Thus my mean educational score 4,82 has allow to me the posibility of entering in magistracy DSTU on a budgetary basis. The same summer I became the employee of management of perspective development (EMPD) of Donetsk metllurgical plant. My job was very interesting because work demanded the creative approach. But also job demanded great responsibility! Result of my summer work became few programs on improvement of manufacture, than I'm proud very much.
Theme of my masters work – « Development of diagnostic criteria of air gap non-uniformity in low-voltage asynchronous machines. » Asynchronous engines are the most used in the industry. During work, under influence of mechanical loadings, in plugs and bearings there are "waste" sites which cause a skew of rotor axis in relation to an stator winding axis. The given circumstance causes rotor rotation eccentricity decrease of engine efficiency. Air-gap non-uniformity can be fixed by means of dispersion fluxes. The purpose of my degree work is development of advanced technique of measurement rotor eccentricity of the asynchronous engine. Measured the given parameter probably to lead correction of an axis of a rotor with simultaneous increase of engine efficiency.
As the conclusion it's necessary to tell, that our university also gives me of passing of military service during the study. Since winter of 2005, after passing examinations, I began passing of military service on DSTU military faculty on a speciality « Fighting application of military parts and the divisions armed by self-propelled antiaircraft rocket complexes of near action. »

Purposes on the near future for me are the successful finishing of university, delivering of master degree, and also the further work in concern. I'm think, that I can realize all purposes, but it is necessary to put to it certain efforts.


DSTU> Master's portal | Abstract | Links | Report about the search