Spartan-3A DSP FPGA Video Starter Kit

Источник : Xilinx.com

About This Guide

This user guide provides information and guidelines for using the Spartan®-3A DSP FPGA Video Starter Kit (VSK), a development platform consisting of the Spartan-3A DSP 3400A Development Platform, the FMC-Video daughter card, and a VGA camera.
Guide Contents
This manual contains the following chapters:
• Chapter 1, “Introduction,” describes the contents of the Video Starter Kit and the
system requirements.
• Chapter 2, “System Setup,” contains instructions for setting up the hardware and
software.
• Chapter 3, “Example Applications,” describes the base platform, DVI pass-through,
DVI frame buffer, Camera frame buffer, and S-Video frame buffer.
• Appendix A, “Development Environment,” provides details about the hardware and
software necessary to modify and rebuild the reference designs included in this kit.
• Appendix B, “IP Repository,” describes in detail the IP blocks and provides an API
Reference.
• Appendix C, “Creating a Compact Flash for the Demo,” provides the step necessary
to copy the demo onto a new Compact Flash card.
• Appendix D, “Troubleshooting,” provides the diagnostic procedure to help isolate the
likely cause if the demo fails to run as expected.
References
1. XtremeDSP Solution FMC-Video Daughter Board Technical Reference Guide (UG458)
2. DVI Standard: www.ddwg.org/lib/dvi_10.pdf
3. MPMC Data Sheet (DS643)
4. Spartan-3A DSP 3400A Development Board Technical Reference Guide
5. Spartan-3A DSP FPGA Family: Data Sheet (DS610)
6. Spartan-3A DSP FPGA VSK Software Guide (UG514)