by theme:
"Mathematical model developing to stain-damage state of rubberclothering bands for mines' conveyors using information about it's macrodamages by punching"
List compiler:
EÌE-00 group master
A.V. Tatarinskii
1.http://resurs.uu.ru/balki.htm-Tape protection from the breakdown, ways of preventing an origin a breakdown in points of loading a material. Eliminating the problems of grip and detrition of tape by rollers, disarmed in consequence of prorashes of material.
2.http://www.polimermash.ru/doc/conferences/2002/thesis.doc-New pipeline tapes of mines' hardfire and new heat-resistant type 2Ò3 for metalworkers. improvement of equipment for the link-up and pipeline tape repair by the method to hot vulcanizes.Go-betweens and quality of tapes.
3.http://www.tera.odessa.ua/TIPTOP/vulk.html-Material REMA TIP TOP for the repair and servicing the pipeline tapes on the whole world. Economical on the cost and time of work a system to cool vulcanizes permits on the professional repair level damaging a surface, edges of the pipeline and chute, as well as punching and even longitudal breakups before several kilometers on hurlled-cords pipeline tapes or tapes with clothing covering. Last are to be join by means of cool or hot vulcanizes.
4.http://metinfo.dp.ua/journal/mgp0301/3e.shtml-Is formulated mathematical model of the intense condition of a conveyor tape at interaction with the worn out drum. The analytical decision of model is received. The influence of deterioration of a drum on the intense condition of a tape is investigated. The sizes of allowable changes of the form of drums of conveyors are offered.
5.http://lsrv.leonorm.com.ua/Default.php?Page=TestLaboratory&ObjId=10001-Vl physicist-mechanical and chemist-analytical test of elastical compossision material and products with them OSO "ËÈÑÈ×ÀÍÑÜÊÈÉ ÇÀÂÎÄ ÃÓÌÎÂÈÕ ÒÅÕͲ×ÍÈÕ ÂÈÐÎÁ²Â" .
6.http://dmeti.dp.ua/st/number19.html-Offered deforming a tape of pipeline to consider as a sequence of deformation. On the first stage to the tape will be add known form. Borders of deforming area are taken hard. On the second stage of restriction on longitudal displacement a walking stick on borders leave. Voltages are defined from the condition of balance a walking stick. Designed new approach allows simplify a problem of determination of tense condition of pipeline tape under the known deformed condition.
7.http://krti.narod.ru/pr-belts-06-r.htm-Tapes pipeline with rubber and cloth for transporting ore of black and colour metals, strong mountain sorts, limestone, dolomite, aglomerat and other highabrasive and abrasive material, at temperature of surround air from minus 45 to plus 60 °t.
8. http://diamand.ru/con_10.htm - CSÎ "Äèàìàíä" - TAPES pipeline with rubber and cloth are make on weaving ÁÊÍË,under the working coat defensive brakers laying for framework protection from the breakdown.Tapes pipeline with rubber and cloth high toughness possess: high toughness and high stability to striking loads, high toughness of relationship between design elements. Advantage of rubberclothing tapes before rubberstock are: increased resilience and flexibility, lowered mass (on 25-30% below masses rubberstock, that allows to spare an electric power at usages), reduction of selffire tape risk (when damaging the rubberstock tapes occurs a sparkling metallic sticks ).
9. http://www.itcp.ru/p/14000-14499.html -ÃÎÑÒ 7338-90-Plates rubber and rubberclothing. Standard specifications.
10. http://tyres-sale.narod.ru/lenta.html -Rubberclothing tape, components of rubber coat serves excelent protection from the wear-out and breakdowns.
11. http://resurs.uu.ru/remont.htm-SÒP "Ðåñóðñ"-hire breakdown of pipeline tapes. Damaging the coats (on rubbersticks tapes with damaging before 4 sticks). Damaging the boards of tape. Transverse cuts of rubbersticks tapes before 20% from the width of tape.
12. http://www.amplituda.com.ua/pub.html-Modern approaches to modernizations of mines' transport. Problem of underground transport - to ensure delivery the whole volume of coal from the lava before the surface, as well as people and material with the maximum velocity and minimum expenseses.
13.http://www.sipr.by/nir/magazine.html -Calculation of tense condition of mechanical joining the rubberalothing pipeline tapes.
14.http://www.apmath.spbu.ru/~vmmdt/connect.htm -The most complex (but, is heal, the most actual and interesting) in the nonlinear theory of bounce are singulary problem, having deal with particular by spots of area, in vicinities which are realized greater deformation and tirns. To such spots pertain ends of rifts and single-line including, angular spots of sharp necklines and including, place of exhibit influences, spots of changing a type of border conditions, axis an dislocation and disclination in crystals.
15.http://www.ibmh.msk.su/vivovoco/vv/papers/technics/GORDON.1/PART02.HTM -Hold up rifts, or how to ensure viscosity.Striking toughness.Criterion Griphits and critical length of rift.Viscosity of nonmetallic material.Surface of section as a brake for rifts.
16.http://resurs.uu.ru/news/ressemin.htm -Link-up of pipeline tapes by method to cool vulcanizes, end-to-end longitudal cut repair, end-to-end breakdowns before 20 % from width of tape.
17.http://7972.ukrindustrial.com/cat.php?oid=8027 - Manual sundae for exact clamping with the double , which guarantees before 75% toughness of closes join from toughness of tape.
18.http://www.lisrtz.com/reztkan.htm -Lisichanskii rubbertechnical plant, pipeline rubberclothing tapes for mines', toughness of tape in the longitudal direction(N/mm), catalogue proposed rubbertechnical mines' tapes.
19.http://www.mysopromat.ru/cgi-bin/index.cgi?n=676 - Tired rift, are executed with using corresponding data: parameters round-robin , conditions of spreading a rift and types S and N. These curves quantify cycles, required for spreading a rift on given distance for different constant values .
20.http://teacode.com/online/udc/53/539.421.html - Generation of rift. Spreading a rift (opening, growing, parameters), probabilistic direction sprinning, process studies in accordance with arising the rifts in uniform ambiences.
21.http://www.vimi.ru/applphys/appl-02/02-2/02-2-23r.htm - Spreading and influence of spottiness of material on the rift path. Stability of deciding a nonlinear differential equation of second order, describing path of spreading a rift in lumpy ambiences.
22.http://www.tvp.ru/conferen/vsppm05s/kipso024.pdf- Spreading the rifts is stipulate by the interaction of defects with the end of rifts. Presentation of data, confirm suggestions on that, that spreading a rift presents essentially discrete process and period of velocity fluctuations. Use this information allows build a model of spreading a rift.
23.http://www.nkfi.ru/conference/2003/maksimenko.doc- Kinematics in tops of rift, are defined corners of initial spreading a rift, is build analytical expression for the description of sidebar of rift, is defined direction of spreading a rift.
24.http://www.nntu.ru/RUS/NEWS/futuretechnology/s5_32.rtf- Description of process of finding, study of generation of rifts, spreading the rifts in lumpy ambiences, as an object of building theoretical sides.