RUSSIAN      UKRAINIAN

e-mail: maksmy1985@mail.ru

BREAFLY ABOUT ME:

- An average mark during the period of studying at university is 4.9;

- I speak the Russian and Ukrainian languages. I have basic knowledge of English and I learn English technical language by myself;

- I have a little operational experience of operating the lathe and in the foundry industry;

- Computer skills: Êîìïàñ - 3D, AutoCAD, T-Flex CAD, Solid Works, Cosmos Works, ÒåõíîÏðî, APMWinMachine, ANSYS, MathCAD, Àâòîïðîåêò, GEMMA. I can write the programs in language PASCAL, programme in ambience DELPHI.

THE CHILDHOOD

        I was born on 5 October 1985 in Dokuchaevsk City. My father is an electrician in the railway shop of Dokuchaevsk Flux Dolomite Industrial Complex. My mother is a rate-setter who works in Dokuchaevsk Flux Dolomite Industrial Complex. My brother is a student of the Dokuchaevsk’s mining technical school (4th course) Dnepropetrovsk mining institute.

         In 1989 I started going to the kindergarten number 1 “The Sun” in Docuchaevsk City. My grandmother taught me to count and to read when I was four. I could summarize the numbers before ten, count up to one hundred, read little texts. Also I knew the English alphabet by heart and I knew a few words in English.

THE SCHOOL

        In 1992 I went to the fist form of comprehensive school number 4 in Docuchaevsk City. At the time of studying I always took part in competitions (both in school and in town) in Physics, Mathematics, Geography, Information Science and often got the prize places. I always went in for sport: chess (even I had a category), went to bodybuilding. In the 11th form I took part in regional competitions on fireman applied sport among the youths, when the team of Docuchaevsk got the fifth place on “fighting deployment” and the eighth general team place (there were about 50 teams from different towns in competition). Every year I was rewarded with the diplomas. I took an active part in life of my school.

         At school I liked the following subjects: Mathematics (most of all), Physics, Geography, English.

         In 2003 I finished my school with the silver medal.

THE UNIVERSITY

         Since school I have liked the exact sciences, and I decided to continue my educational at Donetsk National Technical University. In 2003 I entered mechanical faculty of Donetsk National Technical University on the speciality “Mechanical Engineering”.

         In university I took part in competitions on resistance of materials (including All-Ukrainian; North-Caucasian Regional Student Competition in Novocherkassk, Russia where the team of Donetsk National Technical University got the third place), on machine components and fundamentals of designing (including All-Ukrainian), on mecanical engineering (All-Ukrainian, where the team of Donetsk National Technical University got the fifth place from 20 teams; I took the eighth place individually among 54 participants). I took part in VI and VII annual contest on the best student work in educational institutions of Russia and countries of the Commonwealth of Independent States (CIS) “CAD (computer aided design) system APM WinMachine in education”. I took part in the conference on higher mathematics, on machine components; made reports on VII and VIII international student scientific and technical conferences which were organized chair “Mechanical Engineering” every year, and in XI All-Ukrainian student scientific and technical conference on mechanical engineering in Kramatorsk.

        I have publications in the collected articles “Science of Machines”, which is published by the chair “Design Basis of Machine” every year (3 articles) and in student scientific and technical journal “Engineer”, which is published by the chair “Mechanical Engineering” every year (3 articles).

        Since the third term I have had only good marks. Being the third year student I took part in research theme: “Research of an intense condition of complex case details in mine combines such as KSP-32 and development of recommendations on their designs optimization” on the chair “Design Basis of Machine”.

        On the fourth course I was on the meeting with the rector of the university, where there were some of the best students of Donetsk National Technical University. On this meeting different problems in studding process were discussed. Also on the fourth course I got a grant from the mayor of Donetsk. The certification about this grant was presented to me and other 24 students from different institutes of higher education in Donetsk Dramatic Theatre. The certification was presented by the leaders of Donetsk Executive Committee, the head and pro-rector of the universities. Thus on the fourth course I got two scholarships at the same time.

        In 2007 I graduated from Donetsk National Technical University on speciality “Engineering Mechanics” and received the bachelor degree and I started my master degree course, where I am working at the master’s thesis on the theme “Development of the technological provision and increasing the quality of abrasive processing of thin wall production on the basis of the using ultrasound effects” which has been offered me by my scientific leader - Doctor of Technical Science, professor Michaylov.

        In future I plan to defend my master’s thesis and to take the post-graduate course.