Creating Optical Character Recognition (OCR) applications using Neural Networks
Author: Alex Cherkasov
Source: http://www.codeproject.com/kb/dotnet/simple_ocr.aspx
Introduction
This article shows how the use of artificial neural network simplifies development of an optical character recognition application, while achieving highest quality of recognition and good performance.
Background
Developing proprietary OCR system is a complicated task and requires a lot of effort. Such systems usually are really complicated and can hide a lot of logic behind the code. The use of artificial neural network in OCR applications can dramatically simplify the code and improve quality of recognition while achieving good performance. Another benefit of using neural network in OCR is extensibility of the system ability to recognize more character sets than initially defined. Most of traditional OCR systems are not extensible enough. Why? Because such task as working with tens of thousands Chinese characters, for example, is not as easy as working with 68 English typed character set and it can easily bring the traditional system to its knees!
Well, the Artificial Neural Network (ANN) is a wonderful tool that can help to resolve such kind of problems. The ANN is an information-processing paradigm inspired by the way the human brain processes information. Artificial neural networks are collections of mathematical models that represent some of the observed properties of biological nervous systems and draw on the analogies of adaptive biological learning. The key element of ANN is topology. The ANN consists of a large number of highly interconnected processing elements (nodes) that are tied together with weighted connections (links). Learning in biological systems involves adjustments to the synaptic connections that exist between the neurons. This is true for ANN as well. Learning typically occurs by example through training, or exposure to a set of input/output data (pattern) where the training algorithm adjusts the link weights. The link weights store the knowledge necessary to solve specific problems.
Originated in late 1950's, neural networks didn't gain much popularity until 1980s a computer boom era. Today ANNs are mostly used for solution of complex real world problems. They are often good at solving problems that are too complex for conventional technologies (e.g., problems that do not have an algorithmic solution or for which an algorithmic solution is too complex to be found) and are often well suited to problems that people are good at solving, but for which traditional methods are not. They are good pattern recognition engines and robust classifiers, with the ability to generalize in making decisions based on imprecise input data. They offer ideal solutions to a variety of classification problems such as speech, character and signal recognition, as well as functional prediction and system modeling, where the physical processes are not understood or are highly complex. The advantage of ANNs lies in their resilience against distortions in the input data and their capability to learn.
Using the code
In this article I use a sample application from Neuro.NET library to show how to use Backpropagation neural network in a simple OCR application.
Let's assume you that you already have gone through all image pre-processing routines (resampling, deskew, zoning, blocking etc.) and you already have images of the characters from your document. (In the example I simply generate those images).
Creating the neural network.
Let's construct the network first. In this example I use a Backpropagation neural network. The Backpropagation network is a multilayer perceptron model with an input layer, one or more hidden layers, and an output layer.
The nodes in the Backpropagation neural network are interconnected via weighted links with each node usually connecting to the next layer up, till the output layer which provides output for the network. The input pattern values are presented and assigned to the input nodes of the input layer. The input values are initialized to values between -1 and 1. The nodes in the next layer receive the input values through links and compute output values of their own, which are then passed to the next layer. These values propagate forward through the layers till the output layer is reached, or put another way, till each output layer node has produced an output value for the network. The desired output for the input pattern is used to compute an error value for each node in the output layer, and then propagated backwards (and here's where the network name comes in) through the network as the delta rule is used to adjust the link values to produce better, the desired output. Once the error produced by the patterns in the training set is below a given tolerance, the training is complete and the network is presented new input patterns and produce an output based on the experience it gained from the learning process.
I will use a library class BackPropagationRPROPNetwork to construct my own OCRNetwork.
//Inherit form Backpropagation neural network
public class OCRNetwork: BackPropagationRPROPNetwork
{
//Override method of the base class in order to implement our
//own training method
public override void Train(PatternsCollection patterns)
{
...
}
}
I override the Train method of the base class to implement my own training method. Why do I need to do it? I do it because of one simple reason: the training progress of the network is measured by quality of produced result and speed of training. You have to establish the criteria when the quality of network output is acceptable for you and when you can stop the training process. The implementation I provide here is proven (based on my experience) to be fast and accurate. I decided that I can stop the training process when network is able to recognize all of the patterns, without a single error. So, here is the implementation of my training method.
public override void Train(PatternsCollection patterns)
{ //Current iteration number
if (patterns != null)
{
double error = 0;
int good = 0;
// Train until all patterns are correct
while (good < patterns.Count)
{
good = 0;
for (int i = 0; i
{
//Set the input values of the network
for (int k = 0; k
nodes[k].Value = patterns[i].Input[k];
//Run the network
this.Run();
//Set the expected result
for (int k = 0;k< this.OutputNodesCount;k++)
this.OutputNode(k).Error = patterns[i].Output[k];
//Make the network to remember corresponding output
//values. (Teach the network)
this.Learn();
//See if network did produced correct result during
//this iteration
if (BestNodeIndex == OutputPatternIndex(patterns[i]))
good++;
}
//Adjust weights of the links in the network to their
//average value. (An epoch training technique)
foreach (NeuroLink link in links)
((EpochBackPropagationLink)link).Epoch(patterns.Count);
}
}
}
{ //Current iteration number
if (patterns != null)
{
double error = 0;
int good = 0;
// Train until all patterns are correct
while (good < patterns.Count)
{
good = 0;
for (int i = 0; i
//Set the input values of the network
for (int k = 0; k
//Run the network
this.Run();
//Set the expected result
for (int k = 0;k< this.OutputNodesCount;k++)
this.OutputNode(k).Error = patterns[i].Output[k];
//Make the network to remember corresponding output
//values. (Teach the network)
this.Learn();
//See if network did produced correct result during
//this iteration
if (BestNodeIndex == OutputPatternIndex(patterns[i]))
good++;
}
//Adjust weights of the links in the network to their
//average value. (An epoch training technique)
foreach (NeuroLink link in links)
((EpochBackPropagationLink)link).Epoch(patterns.Count);
}
}
}
Also, I have implemented a BestNodeIndex property that returns the index of the node having maximum value and having the minimal error. An OutputPatternIndex method returns the index of the pattern output element having value of 1. If those indices are matched the network has produced correct result. Here is how the BestNodeIndex implementation looks like:
public int BestNodeIndex
{
get {
int result = -1;
double aMaxNodeValue = 0;
double aMinError = double.PositiveInfinity;
for (int i = 0; i< this.OutputNodesCount;i++)
{
NeuroNode node = OutputNode(i);
//Look for a node with maximum value or lesser error
if ((node.Value > aMaxNodeValue)||
((node.Value >= aMaxNodeValue)&&(node.Error
{
aMaxNodeValue = node.Value;
aMinError = node.Error;
result = i;
}
}
return result;
}
}
{
get {
int result = -1;
double aMaxNodeValue = 0;
double aMinError = double.PositiveInfinity;
for (int i = 0; i< this.OutputNodesCount;i++)
{
NeuroNode node = OutputNode(i);
//Look for a node with maximum value or lesser error
if ((node.Value > aMaxNodeValue)||
((node.Value >= aMaxNodeValue)&&(node.Error
aMaxNodeValue = node.Value;
aMinError = node.Error;
result = i;
}
}
return result;
}
}
As simple as it gets I create the instance of the neural network. The network has one constructor parameter integer array describing number of nodes in each layer of the network. First layer in the network is an input layer. The number of elements in this layer corresponds to number of elements in input pattern and is equal to number of elements in digitized image matrix (we will talk about it later). The network may have multiple middle layers with different number of nodes in each layer. In this example I use only one layer and apply not official rule of thumb to determine number of nodes in this layer:
NodesNumber = (InputsCount+OutputsCount) / 2;
Note: You can experiment by adding more middle layers and using different number of nodes in there - just to see how it will affect the training speed and recognition quality of the network.
The last layer in the network is an output layer. This is the layer where we look for the results. I define the number of nodes in this layer equal to a number of characters that we going to recognize.
Creating training patterns
Now let's talk about the training patterns. Those patterns will be used for teaching the neural network to recognize the images. Basically, each training pattern consists of two single-dimensional arrays of float numbers Inputs and Outputs arrays.
The Inputs array contains your input data. In our case it is a digitized representation of the character's image. Under digitizing the image I mean process of creating a brightness (or absolute value of the color vector-whatever you choose) map of the image. To create this map I split the image into squares and calculate average value of each square. Then I store those values into the array.
I have implemented CharToDoubleArray method of the network to digitize the image. There I use an absolute value of the color for each element of the matrix. (No doubt that you can use other techniques there) After the image is digitized, I have to scale-down the results in order to fit them into a range from -1 ..1 to comply with input values range of the network. To do this I wrote a Scale method, where I look for the maximum element value of the matrix and then divide all elements of the matrix by it. So, implementation of CharToDoubleArray looks like this:
//aSrc an image of the character
//aArrayDim dimension of the pattern matrix
//calculate image quotation X step
double xStep = (double)aSrc.Width/(double)aArrayDim;
//calculate image quotation Y step
double yStep = (double)aSrc.Height/(double)aArrayDim;
double[] result = new double[aMatrixDim*aMatrixDim ];
for (int i=0; i
for (int j=0;j
{
//calculate matrix address
int x = (int)(i/xStep);
int y = (int)(j/yStep);
//Get the color of the pixel
Color c = aSrc.GetPixel(i,j);
//Absolute value of the color, but I guess, it is possible to
//use the B component of Alpha color space too...
result[y*x+y]+=Math.Sqrt(c.R*c.R+c.B*c.B+c.G*c.G);
}
//Scale the matrix to fit values into a range from 0..1 (required by
//ANN) In this method we look for a maximum value of the element
//and then divide all elements of the matrix by this maximum value.
return Scale(result);
//aArrayDim dimension of the pattern matrix
//calculate image quotation X step
double xStep = (double)aSrc.Width/(double)aArrayDim;
//calculate image quotation Y step
double yStep = (double)aSrc.Height/(double)aArrayDim;
double[] result = new double[aMatrixDim*aMatrixDim ];
for (int i=0; i
//calculate matrix address
int x = (int)(i/xStep);
int y = (int)(j/yStep);
//Get the color of the pixel
Color c = aSrc.GetPixel(i,j);
//Absolute value of the color, but I guess, it is possible to
//use the B component of Alpha color space too...
result[y*x+y]+=Math.Sqrt(c.R*c.R+c.B*c.B+c.G*c.G);
}
//Scale the matrix to fit values into a range from 0..1 (required by
//ANN) In this method we look for a maximum value of the element
//and then divide all elements of the matrix by this maximum value.
return Scale(result);
The Outputs array of the pattern represents an expected result - the result that network will use during the training. There are as many elements in this array as many characters we going to recognize. So, for instance, to teach the network to recognize English letters from A to Z we will need 25 elements in the Outputs array. Make it 50 if you decide to include lower case letters. Each element corresponds to a single letter. The Inputs of each pattern are set to a digitized image data and a corresponding element in the Outputs array to 1, so network will know which output (letter) corresponds to input data. The method CreateTrainingPatterns does this job for me.
public PatternsCollection CreateTrainingPatterns(Font font) {
//Create pattern collection
// As many inputs (examples) as many elements in digitized image matrix
// As many outputs as many characters we going to recognize.
PatternsCollection result = new PatternsCollection(aCharsCount,
aMatrixDim * aMatrixDim, aCharsCount);
// generate one pattern for each character
for (int i= 0; i
{
//CharToDoubleArray creates an image of the character and digitizes it.
//You can change this method to pass actual the image of the character
double[] aBitMatrix = CharToDoubleArray(Convert.ToChar(aFirstChar + i),
font, aMatrixDim, 0);
//Assign matrix value as input to the pattern
for (int j = 0; j
result[i].Input[j] = aBitMatrix[j];
//Output value set to 1 for corresponding character.
//Rest of the outputs are set to 0 by default.
result[i].Output[i] = 1;
}
return result;
}
//Create pattern collection
// As many inputs (examples) as many elements in digitized image matrix
// As many outputs as many characters we going to recognize.
PatternsCollection result = new PatternsCollection(aCharsCount,
aMatrixDim * aMatrixDim, aCharsCount);
// generate one pattern for each character
for (int i= 0; i
//CharToDoubleArray creates an image of the character and digitizes it.
//You can change this method to pass actual the image of the character
double[] aBitMatrix = CharToDoubleArray(Convert.ToChar(aFirstChar + i),
font, aMatrixDim, 0);
//Assign matrix value as input to the pattern
for (int j = 0; j
//Output value set to 1 for corresponding character.
//Rest of the outputs are set to 0 by default.
result[i].Output[i] = 1;
}
return result;
}
Now we have completed creation of patterns and we can use those to train the neural network.
Training of the network.
To start training process of the network simple call the Train method and pass your training patterns in it.
Normally, an execution flow will leave this method when training is complete, but in some cases it could stay there forever (!).The Train method is currently implemented relying only on one fact: the network training will be completed sooner or later. Well, I admit - this is wrong assumption and network training may never complete. The most popular reasons for neural network training failure are:
| Training never completes because: | Possible solution |
| 1. The network topology is too simple to handle amount of training patterns you provide. You will have to create bigger network. | Add more nodes into middle layer or add more middle layers to the network. |
| 2. The training patterns are not clear enough, not precise or are too complicated for the network to differentiate them. | As a solution you can clean the patterns or you can use different type of network /training algorithm. Also, you cannot train the network to guess next winning lottery numbers... :-) |
| 3. Your training expectations are too high and/or not realistic. | Lower your expectations. The network could be never 100% "sure" |
| 4. No reason | Check the code! |
Most of those reasons are very easy to resolve and it is a good subject for a future article. Meanwhile, we can enjoy the results.
Enjoying the results
In order to use the network you have to load your data into input layer. Then use the Run method to let the network process your data. Finally, get your results out from output nodes of the network and analyze those (The BestNodeIndex property I created in OCRNetwork class does this job for me).
