RUS | UKR | ENG || DonNTU > Master's portal
Магистр ДонНТУ Борзенков Никита Сергеевич

Nikita Borzenkov

Phisical Metallurgical Faculty

Speciality: Treatment of metals pressure

Theme of master's work:

      Experimental Research of Influence of Shot of Deformation in the Vertical Fellings at Reducing of Slab on the Parameters of Form of Ends of Rolls in a Plan and Forced Lay-by After Their Ironing

Scientific adviser: professor Yevgeny Rudenko

Materials on the topic of graduation: About author | Abstract | Reference

Library on the topic of final work


                ***** Own publications and lectures *****

  1. Study of parameters of forming rolls in the plan after ironing compressed in vertical slab rollers
    Authors : Rudenko E., Borzenkov N.
    Description: The article describes the results of reducing the smooth barrel, followed by ironing

            ***** Articles supervisor *****

  2. The influence of non-uniform compression across the width on the parameters of forming rolls in terms of the roughing rolling plates
    Authors : Rudenko E., Tikhonov A.
    Description: Article by processing experimental data obtained by the prediction model of convexity and concavity of the ends barbette.
  3. The influence of non-uniform compression across the width of the shape of the ends of reverberation in terms of a roughing crates broadband mill
    Authors : Rudenko E., Levin N.
    Description: The article analyzes the parameters of forming the ends barbette after rolling convex samples.
  4. Methods of distribution of breakdown in the vertical wolves universal roughing stands of the mill broadband and criteria for their evaluation
    Authors : Rudenko E., Myagkova O.
    Description: The article describes the evaluation of the effectiveness of the distribution of breakdown of explosives.
  5. The influence of local compression on the horizontal sections of the press corner edges of slabs in the form of slabs in terms of
    Authors : Rudenko E., Yureyko A.
    Description: This article describes the results of preliminary eksperimentovpo topic of developing a new method of rolling plates



    DonNTU > Master's portal| About author | Abstract | Reference