KRYUCHKOVA Akevtina Vital'evna

About itself

     I am responsible, industrious, always finish any job I start. I am able to work with the following software products: KOMPAS-3D, SolidWorks, ANSYS, GeMMa-3D, T-FLEX. I know the blind tenfinger method of typing. I have an experience as an inspector of refrigerator assembling in the department of quality control.I carry with breeding of room plants.

Child's years

    It was born on February, 28, 1984 in the Kyrovskiy district of Donetsk. I am the youngest in my family, therefore I have never been deprived of attention. My parents, Kryuchkov Vitaliy Dmitriyevich, 1951 year born, Kryuchkova Valentina Nickolayevna, 1954 year born and my elder brother Kryuchkov Andrey Vytal'evych, 1977 year born always have guarded me. Due to the male influence from my dad and brother I have developed an interest to technique and ability to make decisions. And due to my mother’s wisdom I have learned to value everything, surrounding me, and to be responsible for my deeds.
     At the age of two I started going to the nursery school «Elochka», and nothing special differed me from other children. In 1990 my family moved to the Leninskiy district of Donetsk. Then I entered the group of ballroom dance, organized in the Palace of culture named ÕÕ² convention. I visited this circle for a year and then I gave up. In 1991 I entered another artistic group after Palace of culture, which I visited to 1994. I have always loved flowers, and today I am bond of grooving room plants and I have already more than 45 different plants.

School years

     In 1991 I entered the first class of general school of the I-III stages ¹26. I was not an excellent pupil , but for this time I never get “three” for any subject. At this school I studied from 01.09.91 to 31.05.95.
     In 1995, I knew about the specialized school in our district and I decided to enter this experimental school ¹37. I entered the 6-th class of the school with an artistic bias, where I could combine studying and drawing. My pictures participated city exhibitions. In the process of studing I sometimes inclined to humanitarian and to exact sciences. I studied well, though there were some problems with the lessons of chemistry, I participated in school competitions on different subjects. In 1999 I finished 9 classes and got the certificate about doing the course of artistic art with an excellence.
     After finishing nine classes I wanted to enter Donetsk art school, however I changed my mind. I decided it was necessary to get higher education, while having hobbies in free time, and I continued studies at school. In senior classes it was determined; that I loved exact sciences more, because I understood that everybody was able to study arts and met everybody would manage to study exact sciences.
    In autumn of 2000 I entered preparatory courses to Donetsk national technical university. An that moment I did not determine yet what speciality to choose. One thing I was sure about that this must be a speciality, requiring creative approach to the problem solutions. So in spring 2001 I entered Donetsk national technical university on speciality «Technology of machine building» passing the rating tests.

Studies in an university

    During my first year of studies at the university I did not show special ardour to the study of subjects. But I decided that if you wanted to achieve something in life, it was necessary to strive for it by your knowledge. I began to pay attention to my studying, to take part in conferences on disciplines: resistance of materials, detail of machines. Together with my class-mates under the supervision of Y.F. Kosolapova I prepared the articles on mathematics on a theme «Elements of theory of casual sizes».
     From 07.07.03 to 27.07.03 I passed educational practice in HPS ¹67. Having finished practice I got the certificate about acquiring of qualifying level of turner of the second category.
     From 05.07.04 to 25.07.04 I had a technological practice on JSS «Gormash», where I got acquainted with the real production, technology of making the coad mining equipment. At this time I was busy with the research work under the supervision of senior teacher Golybov N.V. on a theme: «Research of geometrical parameters of global worm-gears». A question about the improvement of construction of global worm-gears, which can provide smooth, noiseless work and high evenness of rotation, was considered in this theme. I make a report at annual scientific and technical conference organized by a department «Technology of machine building» on the theme of the work.
     From 01.07.05 to 01.08.05 I had a designer-technological practice on JSS «Nord». There I learned how conveyers worked and knew technological process of assembling of refrigerators. During my practice I worked in of technical control department as an inspector on different stages of assembling and testing of refrigerators.
     In 2005, I successfully passed state examinations, and got qualification of bachelor and diploma with a excellence. After that I decided to continue studies in a during. Years of studies at the university I got not only knowledges on base objects but also something greater.
     At present I am writing master's degree work on a theme: «Improvement of treatment of details from materials which are difficult to process with the use of EAP». This theme is very actual, because exposes a question about transition from treatment by cutting to other methods of treatment. EAP allows to process the surfaces of details in places difficult at access, to process surfaces which are impossible to machine by cutting. Applying EAP it is possible not only to get high quality surfaces with low roughness but also to consolidate the superficial layer of detail. Thus it is less labour consuming and more effective. I am engaged in preparation of articles on the theme of my master's degree work for publishing in the scientific and technical journal «Engineer». My scientific supervisor is the associate professor Boltyan Andrey Vladimirpvich helps me in every way. I hope, that my developments will find deserving application in industry.

Plans on the future

    Studying at university I got a good base of theoretical knowledge, however I consider that, not having practical skills of work in the real production it is impossible to be a real specialist in this sphere. After graduating the course and getting the diploma of master's degree therefore I do not bean to continue studies in post graduate school. I want to perfect myself in English. In the near future I want to get a good job, where in practice I will apply the acquired, if possible, knowledge and I will be able to to realize the potential to a full degree and be useful to the society profit to society. Then I plan to get the second higher education related to economic activity, and to open the own enterprise.