Gubin Timur

  Short resume

        In 2008 I finished DonNTU with specialization in «Technology of machine-building» and I’ve got a bachelor’s degree with honours (average grade 4.96) and joined the master’s programme. I have an experience with the following systems of automated projecting: Kompas, Autoproject, Vertical, SolidWorks, T-Flex CAD, TekhnoPro, AutoCAD, Ansys, CosmosWorks, APM WinMachine, MathCAD. I speak Russian and Ukrainian languages (free), and I know English at base level.

        I was born on 12 December 1986 in Donetsk.

        First 7 years of my life weren’t too colourful and I spent them in Donetsk. However I don’t remember a lot from this period of time. In 1993 I moved to Russia with my family, where I had lived till 1999 in Volgograd region. After arrival I entered secondary school, where I’ve studied first 6 classes.

        In 1999 I returned with my family to the motherland in Donetsk, where I was studying from 7th till 11th classes at the secondary school 14. At school I participated in subject olympiads and I tried to extend the knowledge due to reading of additional literature.

        Considering the further studying prospect at institute of higher education I’ve chosen the mechanical faculty of the Donetsk National Technical University.
        In 2004 after finishing 11 classes I entered Donetsk National Technical University on the mechanical faculty by ratings tests, where I study with specialization in «Technology of machine-building».

        During my education I participated in the olympiads of different scale at the following disciplines «Descriptive geometry», «Resistance of materials», «Electrical engineering», «Details of machines», and also at scientific-technical conferences at the discipline «Technology of machine-building». After finishing the technological practice on the second year I’ve got the certification of turner of the second grade.

        During the education I devoted my time to the section of sports archery, where I gained the good experience in archery.

        I like to listen the heavy music, which is with me all of my conscious life, I read belles-lettres in the genre of science fiction, fantasy and other, also I interested in some billiard games, especially in snooker.
        Since 2005 till 2008 I’ve studied at the military department at DonNTU. Then I’ve got the rank of the second lieutenant of reserve.
        In 2008 I passed the state examinations and I’ve got honours degree of bachelor. Then I joined the master’s programme.

        The associate professor, candidate of engineering sciences, lecturer of department «Technology of machine-building» Ivchenko Tatjana has become the scientific adviser of my master work on the theme «The upgrading machine details by the combined finishing-strength and blade treatment and substantiation report for rational conditions of it application». I think that this theme is one of the most important in the machine-building, because this problem and possibility of application of the combined treatment is very actual in the modern machine-building branch and requires more detailed consideration and analysis.

        The studying attracts my interest to the systems of automated projecting, because in the future I would like to find the pure high-paying perspective job, coinciding with my interests and deserving of the graduating student of DonNTU. Due to studying, I would like to become a highly skilled specialist in sphere of technology of machine-building and bring the contribution into the development of modern machine-building industry. In the future I want to travel around the world and go to round-the-world voyage.