Education
Personal development
I, Rakovich Roman, was born on September 15, 2002 in Donetsk. My parents: father Rakovich Vladimir , born in 1980; mother Rakovich Elena, born in 1981.
My family had a significant influence on the formation of my personality and interests.From a young age, my father instilled in me a love for modeling and repairing equipment, he brought up in me a strong, confident and strong-willed person who is able to overcome life difficulties and solve professional problems. My mother, in turn, instilled in me such human qualities as love, loyalty, kindness and honesty, which allows me to be open in communication and a well-rounded person.
In 2008, I entered Gymnasium No.41.Donetsk, where I studied until 2014, graduating from six grades. Due to circumstances independent of me, I had to change two schools, secondary school No.42 in Donetsk, where I studied until 2016, and secondary school No.21.Donetsk, where, thanks to the work and attention of the teaching staff, I was able to discover my mathematical abilities and craving for a technical specialty.
During my school years, I took an active part in Olympiads, sports competitions and performances, and was engaged in volleyball. During this time, strong-willed qualities have strengthened and purposefulness has developed.
After graduating from the eleventh grade in 2019, I found myself choosing a further place of study. But fortunately the choice was not difficult, because in my opinion Donetsk National Technical University (DonNTU) is one of the best technical universities in the Russian Federation, located in my hometown. DonNTU has a rich history, extensive experience in training and creating worthy specialists in its profession.
Professional development
After graduating from school in 2019, he entered Donetsk National Technical University at the Faculty of Integrated and Mechatronic Industries, specializing in hydraulic machines, hydraulic drive, hydropneumoautomatics
. The instilled and acquired interests aroused in me a deep interest in technology and industry in general. Later, the motives for choosing a university and a specialty were my predilections for the exact sciences (physics, mathematics) and scientific activity in general.
The choice of specialty was quite difficult, I considered three areas: microprocessor technologies, methods of technological production or hydraulic and pneumatic drives. But with the help of my brother, who has been successfully studying at DonNTU for 4 years and a little thought, I realized that hydraulics or pneumatics are used everywhere in modern production. Anyway, in some form it is present everywhere from mechanical engineering to construction. Based on the personal beliefs and advice of my brother, who studied in this field, my choice fell on the specialty Hydraulic machines, hydraulic drive, hydropneumoautomatics
at the Faculty of Integrated and Mechatronic Industries (FIMI).
The period of study at the university only strengthened my confidence in choosing a field of study. With each new subject, I realized that I was becoming a worthy representative of my profession. Studying at higher school turned out to be very interesting and informative; a high level of education, a variety of disciplines has a fruitful effect on a person, helping him to become a fully developed personality, which happened to me. My supervisor, senior professor, helped me choose the topic of work in the fourth year. Gulin Valery , but unfortunately, he could not remain my supervisor in the master's program. After graduating from the fourth year and receiving a bachelor's degree, I decided not to stop there and enroll in a master's degree for further professional development.
In 2023, he entered the DonNTU Master's degree program, remaining in the same specialty hydraulic machines, hydraulic drive and hydropneumoautomatics
. My new supervisor was D.T.N., professor. Kononenko Anatoly , together with him we had to choose the topic of my master's thesis Justification of the rational parameters of the working body of the hydraulic pulse installation of the combined principle of operation
. This is a very relevant topic not only in our region, as it can be actively used in a coal mining enterprise, but also in other industries, for example, construction and mechanical engineering.
Goals, plans and vision of the future
The immediate goal is to write and defend a master's thesis, gain practical knowledge and skills in the field of mechanical engineering, modeling, programming, mastering modern technologies necessary for effective work, as well as obtaining a master's degree.
After completing my studies, I plan to get a job at an enterprise in my specialty and make every effort necessary for effective work. And to become not only an excellent and valuable specialist in your field, but also not to stop there, continuing to develop engineering skills and master new methods of designing and modeling technical systems.